I made Jeans |

I’m back with more jeans! This might be my favourite pair, though playing favourites with the jeans I’ve made is like picking a favourite child!

The only thing that maybe stops this pair of Dawn Jeans (what other pattern would it be, lol!) is how much the button fly gapes when I sit down. I do prefer how the pairs I’ve made with zips fit and look when I sit so that’s something to remember if I make another pair (not that I need more jeans at this point 😂).

The jeans are also just a little too tight on my thighs when I sit down. I definitely fell into the trap of fitting the jeans only standing up! But the denim will stretch with wear I think. Speaking of the denim it’s from Sew Me Sunshine (she still has it in stock here) and it was a dream to sew with. It’s relatively thin but that means I’ve been able to wear these when the weather’s been a but warm (whereas trying to wear my black skinny Dawns was not great in a heatwave!).

As with my other pairs I made the size 4 and took off 2cm off the back seam, grading to the normal seam allowance 20cm down, as I’ve done with the other pairs.

I made the straight-legged version of the pattern. I do kinda want to make the wider-legged view because I really like my Morgan Jeans but I wore them yesterday for the first time in ages and the pockets are tiny and I prefer a higher-waisted fit.

I spent quite a lot of time fiddling with the fit on the back, because (for want of a better phrase) they creep up my arse! But this has already slackened as I’ve worn them a couple of times. I fiddled with the fit on the back seam, letting it out a bit, and fiddled with the crotch seam and the inner leg seam and none of it seemed to make much of an improvement so I went back to sewing it as the instructions said. If I had more experience and expertise in fitting I’d probably have know what to do but meh. They look fine now they’ve stretched the tiniest bit.

I took up a 5cm hem, again, as I’ve done before.

The jeans look pretty wrinkly in these photos but they feel like they fit really nicely on my body so I’m not so bothered about how they look.

You can see how the fly gapes a bit here. It doesn’t gape as badly with my other pair with the button fly but I guess it’s because the denims are different – I know other people say you kinda have to fit each pair of jeans individually unless the denim is identical because even a slight change in fabric can make a difference as to how they fit!

I do slightly wish I’d sewn a pattern on the back pockets, but I’m always just thinking about moving onto the next step so it didn’t even occur to me to do it!

Are you tired of hearing about my jeans yet?! I think I’ve got one more pair to share after this – I’ve slightly lost track to be honest, lol!

I’m still on furlough but I’ve slightly lost the impetus to sew any more – also I’ve sewn so much of my stash and so many of the garments I’ve wanted in my wardrobe for literally years. Maybe this gives me an excuse to buy more fabric 🤔

I made jeans again! It’s been a year since I made my Morgan Jeans, and they have been the only jeans in my wardrobe that whole time. But even after realising making jeans was doable I still put off making more for ages!!! And I don’t really know why – well I do know why. I wanted some more fitted, skinny/straight legged jeans and I’m by no means an expert on fitting trousers so I was scared! I’m sure you can all relate!

So here they are! Luckily the size 4, which I made, fitted fairly well straight out of the packet. I actually had to retrace the pattern because I’d traced the size 6 or 8 (I can’t remember – though I made the Morgans in a size 8) because I’ve lost an inch from my waist and hips sometime in the last year – I think from going from an office job to being on my feet, first at a fabric shop and then at a bookshop. The size 4 matched my waist and hip measurements perfectly so I was hopeful they would at least fit on my body!

I did make some fitting tweaks as I sewed these up – as the pattern suggests, I sewed up the main pieces to see how they would fit and any changes I might have to make, before all the seams are sewed, finished and top-stitched. I would definitely recommend this if you want to see the vague fit before you put in all the work of making the jeans fully! It’s like the lazy person’s toile!

Before I cut the jeans out, actually, I shortened the legs by 2 inches at the knee. Closet Case drafts for someone who is I think 5’6″ and I’m 5’3″ so I knew the legs would be too long – I could have just shortened them from the bottom like I did with my Morgan jeans, but then you get the ‘knee’ half way down your calf instead of shortening the pattern piece on the lengthen/shorten lines.

I also made some other fitting changes to the legs while I was sewing them up. I sewed the outside leg with a 1cm instead of a 1.5cm seam allowance as the legs ended up super tight! Luckily there is extra length in the waistband so I could still fit the waistband on without having to lengthen it.

Having worn these jeans a few times since I finished them, the waistband could have been curved a bit more as it every so slightly stands away from my body, but the plus side is that it does make them still comfortable to sit down in!

I did have plans to make some more Ginger jeans and if I did I would definitely deepen the front pockets! It’s the same for the Morgan jeans, but they’re really shallow. And if I wanted super tiny pockets I could buy rtw jeans! I can’t even get my whole hand in them!

Despite shortening the legs before I cut them out, I did still have to do a 3cm hem! I didn’t trim the excess off, I just folded it up 1.5cm twice.

I waited until the jeans were basically finished to place the back pockets – I’ve seen loads of people on instagram do this and it seems sensible, rather than following the guidance on the pattern piece as every bum is different and you want the pockets to be in the right place for your particular bum!

Having made a couple of denim skirts ages ago (one for my sister and one for me) I knew my sewing machine doesn’t love top-stitching thread (or I don’t know how to correctly configure it for it to work!) so I used normal thread in the right colour. It means my stitching doesn’t stand out as much as if I used top-stitching thread but it’s worth it for the lack of headaches and tantrums which would be inevitable if I tried to use the thicker thread!

The fabric was from Birmingham literally years ago! I just looked it up – I bought it in 2014 I think!!!!!! Wow! Ridiculous! I bought it to be a wearable toile for the Ginger jeans and it has definitely worked for that, but I don’t think it had to wait for as long for me to find out!

I’ve finally been bitten by the jeans making bug I think – I made another pair alongside these (coming soon to the blog) and I have 3 more pairs planned, 2 of which are cut out and ready to go. Don’t be like past me, don’t be scared to make jeans!