So when The Boyfriend and I moved into our current flat in Cirencester, we bought a load of furniture as we’d always lived in furnished flats in London. We did a big Ikea order of a bed, some kalax shelves (which seem to be the only thing in which to store sewing supplies!) and some bedding. Luckily The Boyfriend shares my love of yellow so we bought some cute yellow and white striped bedding. Less luckily, it seems there is a difference between UK and European bedding sizes and the quilt cover looked like this:

As you can see, the quilt cover is way too small. I think we have a standard double quilt, but I guess the European double is smaller? Luckily we also ordered (totally by accident) a single fitted sheet, so I decided to use this to add strips to the sides of the cover to make it fit over our quilt. It would have been better if this had been a flat sheet, though, because I had to unpick the elastic from the edges and then the sheet isn’t a full rectangle.

Having laid the Ikea cover on top of the quilt, I measured (flat) that I needed an extra 65cm on each side to make it fit our quilt – it was 151cm wide but needed to be 216cm wide. The reason it needed to be 65cm on each side was because it needed to be that much bigger on the bottom and the top, so I had to add twice as much fabric as I originally thought. I also made sure to add a 1.5cm seam allowance. Because I was using an unpicked fitted sheet, I had to piece the strip on one side:

You could choose to piece it if you wanted anyway, to get a side seam still on each side – I have a side seam on one side but not on the other, so it probably looks a bit funny, but I didn’t have quite enough width to be able to make a seam on both sides. So in the above photo, the one on the left is the side that ended up with the seam (obvs!) but it was also a bit shorter because fitted sheets are like a cross on each end, so the middle is longer than the sides – the whole side on the right is the middle and the 2 pieces on the left are the 2 sides of the sheet. If that makes any sense at all! It didn’t matter in the end that one strip was shorter as they both ended up too long, but I left them a bit on the long side so I’d be able to neaten the ends and would have some fabric to play with while I worked it out.

I’d actually unpicked the original side seams of the quilt cover back in November but only got around to sewing it back together this month! I first sewed each side of the strip to the 2 sides of the quilt cover, with the quilt cover inside out so both edges would be right sides together. With the quilt cover still inside out, I went to each corner, where there was a hole at the ends of the new white strips, and pinned it in a straight line from the original top and bottom, then sewed it from the original seam, so the new edge of the quilt.

I ended up not taking too many useful photos, so I hope my written instructions vaguely make sense. It was fairly easy to figure it out as I went along, so hopefully if you do end up having made the same ordering mistake as me, you can increase the size with the help of a sheet. I felt it was easiest to add strips to the edges so I didn’t have to alter the buttons at the bottom – it has ended up with a narrow opening compared with the new width of the quilt cover, but we can stuff the quilt in so that’s good enough for me! It definitely makes our bedroom look a lot brighter!

I want to make some kind of something to go above the bed on the wall because there’s just a big empty space at the moment. I’m thinking of a big weaving, like they’ve made on A Beautiful Mess, but with more colour! The Boyfriend also quite wants to paint our bed frame and bedside cabinets, but I’m not convinced as I don’t really like painted furniture, but I see his point that it’s all a bit bland and beige! Any thoughts?

 

Save