The Refashioners 2018: Miss Fisher Costume

If you’ve read my blog before you may know how much I love the show Miss Fisher’s Murder Mysteries in part at least because of the costumes. So when Portia announced this year’s Refashioners theme was ‘inspired by’, I couldn’t resist making a costume from Miss Fisher. I really wanted to make her amazing silk robe, but I didn’t think my embroidery skills would be up to it (I’ve done embroidery twice and both times it’s been a little rudimentary).

(image source)

So having ruled out the robe, I then decided to make her signature trench coat and matching hat. I also made trousers, a blouse and a camisole to go under the coat! Fair warning this is a long post with lots of photos! Feel free to skip to the end to look at the finished look!

Here are the garments I started with (and how much I paid for each one):

Large trench coat



Jersey maxi dress


Polyester petticoat skirt


Polyester blouse – I wanted to get a dress to make the blouse, but couldn’t find anything suitable so I had to settle for this blouse.

TROUSERS

First I dyed the dress navy blue – it was mostly viscose so the normal Dylon hand dye took quite well and it didn’t matter that it was beige.


I then sewed 2 parallel lines from the hem upwards, with the right sides together, to roughly where my crotch was when I held the dress up with the hem on the ground. I then cut between the 2 lines and voila, I had trouser legs! I then tried them on, sewed a better bum curve. I then sewed a large hem channel at the top and threaded some elastic through  – I know elasticated waisted trousers are not super accurate for Miss Fisher, but these will become my ‘lounging around the house’ trousers, so at least they’ll get some more wear!

CAMISOLE

Again, I started by dying the skirt – I put it (and the blouse) in the same dye as the dress, knowing that because they were both synthetic that the dye might not take as well, but it didn’t take at all! Luckily Instagram came to my rescue and a couple of people told me about Rit Dyemore Synthetic dye. I ordered this in navy blue (to match the trousers) but this was as dark as it went.

First I cut off the elastic, and saved it in my stash to use on another project in the future. I turned the skirt upside down, so the lace on the hem was at the top. I then pinned and sewed new side seams and trimmed off the extra fabric, to use as the straps. I cut 2 strips 5cm wide, then sewed them with a 1.5cm seam allowance so they ended up 1cm wide.

I then stitched the straps on the back, put the top on and pinned the straps where they needed to sit on the front and stitched them in place.

I made the camisole because often in Miss Fisher you can see through her very thin blouses that she is wearing one underneath – I guess it was also underwear in the 20s – but my blouse was too thick to see it so I didn’t really need it, but you live and learn!

BLOUSE

After dying the blouse and petticoat supposedly navy blue they looked like this:

Then after the synthetic dye – which involved cooking the whole lot for over an hour – it looked like this, which was an improvement, but sadly not the colour I was after. The outfit I was basing it on was black, but I was going for navy but then it was this light grey-ish blue.

I unpicked most of the blouse – which took a while because it was all overlocked! I unpicked the collar and placket, and then sewed a new centre front seam to get rid of the extra fabric from the placket. I then used the scout tee as the basis for the new shape of the back and front, but I made the front a v-neck. I then sewed the sleeves back in, and used the yoke which I’d removed from the back to make a facing, understitching it to try to make it lie on the inside.

This is the blouse I was basing mine on so I decided to make the pattern on the fabric myself, since I didn’t find a garment with the right kind of geometric pattern on.  I remembered seeing this blog post on Tilly’s blog by the lovely Zeena Shah so I bought some dylon fabric paint. And I thought an empty spool of thread would be the perfect thing to approximate the circles on the original blouse.

Again, because the fabric was so synthetic, the paint didn’t take as brightly white as it would have if it was a natural fibre, but I think the effect was okay.


I used the 2 halves of the collar as the scarves down the sides of the blouse, and although it’s the wrong colour, I think it looks okay as a copy.


I’m pretty proud of the fact that this tiny pile of scraps is all I had left from the above 3 garments!

HAT

I initially thought I was going to be able to make up a hat by myself, but after doing a bit of research, I discovered someone else had also made the Miss Fisher hat and coat and she used the Sybil pattern by Elsewhen Millinery so I downloaded it and am so glad I did!


(image source)

There is a lot of topstitching on her hat – and that was definitely the part that took the longest! That and working out if I had enough fabric to squeeze the hat pieces onto. I used every scrap I had – the fabric I cut off the hem of the coat, both lining and main fabric, and the big flap from the back of the original coat. Apart from the buttons on the coat, and the elastic in the trousers, the only other new thing I used was interfacing for the hat. All of the main pieces are interfaced and one side of the brim is.

I found my tailor’s ham had an additional use by allowing me to pin the lining to the outer of the hat. The lining overhangs a little, which it’s supposed to.

To stiffen the brim a little – I thought it would be too floppy with nothing, but I didn’t want it to be really stiff – I remembered I had this wire stuff from when I made my Doc Brown costume. It was perfect!

I put 2 rows in and sewed another couple of lines of topstitching, each with a 1cm seam allowance. I can definitely recommend this pattern if you want to make a 20s style hat. I did make a change to the shape of the brim and made it a bit wider at the back, though it was still a little narrower at the back than the front.

COAT

The coat was, obviously, the main task for my refashioners project. First I unpicked everything!

I even unpicked the welts from the pockets.

I also unpicked the collar, which it turned out was unneccessary – Miss Fisher’s coat doesn’t have a collar stand, but I thought I would have to resize the original collar since I had resized the rest of the coat so much, but weirdly the collar fitted in its original size!

Miss Fisher’s coat has big patch pockets, so I placed some fabric behind the holes from the welt pockets to try to repair the holes – knowing the holes themselves would be covered with the patch pockets.

This is what it looked like from the front when I’d finished the repair.

I then made new pockets from a piece of the coat which I no longer needed – I can’t remember what it originally was, though.

I used the original welt from the pockets as the flap on the top of the new pockets – handy!

The adjustments I made to the body of the coat were:

  • resewed the back seam, removing the excess fabric from the original vent, with an extra 2cm taken out.
  • Stitched the raglan sleeves back in, with an extra 2cm seam allowance at the front and the back.
  • Stitched the underarm and side seam, as one, with an extra 2cm seam allowance, then stitched again with another extra 2.5cm.
  • I did all of this with the lining too, though it had set-in sleeves instead of raglan sleeves.
  • I cut 7cm off each of the coat fronts and off the facings, and then stitched the facings back on. I ended up cutting off all the original button holes, which was handy!
  • I then reattached the collar.
  • I then sewed the lining back in, fudging it where it didn’t quite fit any more – It miraculously did fit quite well, it was just at the front where I had changed it from double breasted to single breasted, where it needed some tweaking.
  • I cut 23cm off the length of the coat, off the shell and the lining, then bagged it out.
  • I cut 8cm off the sleeves and used the great Grainline method for attaching sleeve linings and shells.
  • I also used the original shoulder tabs as the tabs on the cuffs of the sleeves.

The final things was to make new button holes and sew on the new buttons, which I got from my local sewing shop.

This is all I had left from the coat and hat refashion. There is a bit more than I thought, but it’s mostly thin strips which I shaved off each seam, and some bits left over from the larger pieces after cutting out the hat. Not bad, though, I don’t think!

Phew! If you’ve read all of that, you deserve a medal. If you’ve skipped ahead to just look at the photos, I don’t blame you!

I took the blouse off so you could see the camisole underneath, but it looks so, so wrinkled – sorry! It was actually sticking to me, it’s so synthetic, so it may not be a top that gets much wear when it’s hot, but it would be good for layering when it’s a bit chilly.

I especially like the back view – it’s a distinctive silhouette and I think I look quite like her! (Obviously when you can see my face, the illusion is less complete!)

I couldn’t not have an outtake from all the ‘walking towards the camera’ shots. You. Are. Welcome!

I really didn’t mean to be posting this so close to the deadline, but I’m not surprised! Everything always takes me longer than I think it will.

Did you do a refashioners project?

 

 

Review of 2017

As this year approaches its end I (like many other sewists and bloggers) thought it would be fun to look back and see what I achieved sewing-wise.

The main part of my planning for this year had been my #2017MakeNine but I only managed to make 4 of the 9 patterns I had planned to make.

To slightly defend myself (against who?!) I did make 3 of the 4 patterns twice. (For all the makes below, click on the photo to be taken to the full blog post).

I made 2 Marianne Dresses and I love them both – both are from quite light weight jersey so they’re not the best for the cold weather we’ve been having in the UK recently.

I also make 2 Moneta dresses, though I don’t really wear the first one because I stretched out the neckline while making it.

I also make 2 Inari Tees, and I have a dress version cut out ready for next Summer – I didn’t get around to making it last Summer as it didn’t seem to last long enough!

The other make I managed from my Make Nine was my Roberts Collection dungaree dress. I did want to make the dungaree version as well but I didn’t get around to it.

I bought denim to make both pairs of jeans back in April but I didn’t quite get around to making them. I also have 2 fabrics to make the Carolyn Pyjamas from so I think I’ll bump them onto next year’s list too.

I also had joined the #SewMyStyle project and although I knew at the outset that I wasn’t going to make all 12 garments throughout the year, I only managed one – the Toaster Sweater, which I think was the pattern from January (though I’m pretty sure I made it late).

Although I didn’t make loads of the things I had planned at the beginning of the year, I did make quite a few things in the last 12 months.

I made a few presents and non-clothes, including 2 pyjama cases (a monkey and a penguin), a sack for work, a tailor’s ham and sausage (stuffed with fabric scraps), and a moomin embroidery (which helped me realise I actually quite enjoy embroidery).

I managed to refashion 3 garments: a simple tee refashion, my Christmas Party Dress and – the one I’m probably most proud of – I refashioned one of my dad’s suits into a suit for me.

In terms of sewing from scratch, this year I made:

  • 8 dresses
  • 1 pair of trousers and one pair of culottes
  • 2 skirts
  • 8 tops
  • 1 pair of shoes

The shoes were definitely a highlight! And after listening to Jasika’s episode of the Love to Sew Podcast, I feel inspired to make more shoes!

I am also proud of having made trousers for the first time! Shame I didn’t parley this into making more pairs of trousers as they are the thing that is really lacking in my wardrobe now.

These trousers are probably my most worn make of the year, but also getting honorable mentions are my stripey jersey dress which I’ve worn loads considering it was a late-in-the-year make.

I’ve also worn my grey-blue melilot shirt loads this year, so I definitely have more planned.

I feel like I can’t do a round up of the year without mentioning my Dressmakers’ Ball dress – ooh, I’ve just realised I made an extra pair of trousers than I listed above because my dress had trousers underneath! It was definitely one of my favourite makes from the year and it was fun to do some – very basic – drafting to alter the Emery dress to make the copy of the Emma Watson outfit I liked so much.

There were some other things that I mentioned I wanted to do in 2017, like make a quilt, re-upholster a chair and make a wall hanging. I did none of these things. I did, however, complete the Wardrobe Architect project and I do think this helped me to focus my sewing and fabric buying.

Obviously on a personal level, 2017 wasn’t the best – and 2016 sucked too – so here’s hoping 2018 isn’t quite so crap and I have no family sadnesses.

Did you meet your goals in 2017? Are you rolling some of them into 2018 if not? I will – I think some of my #2018MakeNine will be the ones I didn’t make in 2017!

Refashioners: making a suit…..into a suit

As I mentioned in my October makes post, one of the makes that took up quite a lot of time was my suit refashion, which is my entry for the Refashioners 2017. I joined in 2 years ago and refashioned 2 men’s shirts (1 & 2) and wanted to join in last year but family events took over and I didn’t get around to it, so I was very keen to take part this year. When I was at home in August, I suddenly had the thought that it would be nice to use one of my dad’s suits rather than a random suit from a charity shop (though perhaps I would have been more adventurous if the suit had been more anonymous?!) so I asked my mum if she still had any of my dad’s suits (he was in a care home at this point). She had one still in the wardrobe – she had got rid of most of them quite a few years ago, when he stopped having a job that required wearing a suit every day. It was a St Micheal’s one (which I think is a Marks and Spencers brand) and it was apparently made in Israel.


Although my Dad had been ill for a long time – he had a rare degenerative brain disease called Corticobasal Degeneration (CBD) for quite a few years, I obviously did not think that by the time I refashioned the suit he would no longer be with us. So this refashion became even more poignant to me than it would have been. I’m a little sad that he won’t see me wearing his suit, but c’est la vie.

My Dad wasn’t a huge man, so I was a little shocked by just how big the suit was on me – though I am small I suppose.

 

The first thing I did was to unpick the vast majority of the seams – and man did it take a long time! It was my occupation while watching TV in the evenings for about 2 weeks. I even took a picture of all the thread I removed (with pin cushion for scale)!

And this is the pile of pieces.

I unpicked everything from the trousers – side seams, inner leg seams, the fly, the zip and the waist band. I even managed to pry off the metal hook above the zip to use again later. The only things I left were the pockets and I wanted to use them in the new trousers. With the jacket I similarly unpicked everything – I removed the lining, the took the sleeves off both lining and shell, unpicking the underarm seam; I unpicked the side seams of both lining and shell; the shoulder seams; and I unpicked all parts of the collar. I also removed the shoulder pads and removable canvas around the shoulders – most of the interfacing and the like I left as I was remaking a jacket, so it saved me a job!

And this is the finished suit! I’m pretty pleased if I’m being totally honest. And I think I’ve been bitten a bit by a tailoring bug and would like to make a proper jacket from scratch to see all the processes I was able to skip by virtue of them already being done.

I thought I would go into detail about the trousers first, then the jacket, as that’s the order I re-made the suit in.

I used the Simplicity 1696 pattern as I knew I would be able to just about get them to fit me as I have made the pattern once before. As you can see below, I did extend them a little higher in the waist as I wanted to keep the full pockets, and although the trousers were quite big on me, I couldn’t bring the pattern piece to the top of the original trousers as the crotch curve wouldn’t have fit. After taking so much off the legs of the pattern the last time, I decided to narrow the legs at the pattern stage – though I ended up taking them in too much, so I had to reduce the seam allowance to 0.5cm to make them not skin tight!

I made the size 14 as before, and did quite a bit of fiddling with the crotch curve. I took 4cm in total off the back seam, including the waistband (which is the original waistband of the trousers, and the original waistband facing) and had to take 2cm off both crotch curves (front and back) – I think that’s what they’re called? I kept basting the seams, then trying them on, then unpicking them, then repeating the whole process until I thought it was good enough. They’re not perfect, but I didn’t want to over-fit them and make them uncomfortable to sit down in, which is always a worry!

Men’s pockets are soooo huge! I’ve got other ready to wear things (and probably things I’ve sewn) with teeny tiny pockets – pockets too small to fit an iPhone. But I can get half my arms in these pockets! I’m very glad I kept them. Also it’s so quick to sew a pair of trousers when the pockets are already done!

I did do a totally new fly, though I used the original zip. I had to slightly fudge the fly piece and the fly shield as because I had made them more high-waisted than in the orignal pattern, the pieces weren’t tall enough to reach the waist band. The original fly and fly shield were much thinner than the ones for this pattern, so I used the pieces I had cut off the bottoms of the trouser legs to make new pieces. It pretty much worked, and you can’t see any of the McGyvering on the outside.

One of the things I’m proudest of is managing to keep this metal clasp – I bent the prongs that went through the waistband facing to get it off, then poked it through once Id finished the trousers, when I knew it would be in the right place. The hook part of the clasp stayed where it was from the original waistband – I just made sure I used that end in the right place and trimmed the excess off the other side (and from the back seam too) so I could keep the metal thingy.

The original waistband facing (and the pocket bags) are made from this weird cream fabric, as shown above. The facing must be interfaced as it’s quite thick (unless they’re 2 different cream fabrics). Anyone know why it would be so contrast-y? Also there was a gusset from the same fabric in the seat of the trousers, but I did not put that back in as it looked a little worse for wear (gross!).

I also managed to keep the one back pocket, though I definitely think it could have been placed better! I cut out the 2 back pieces at the same time, for speed, but didn’t really take into consideration where this pocket was and made it so I was worried it was going to disappear into the side seam. Luckily there’s only one, so it’s not like one is perfect and the other one is around the side, so hopefully it isn’t as noticeable as I think it is!

Even after cutting off a chunk of the length of the trousers when I trimmed the legs to match the Simplicity pattern, I still had to shorten them by 8cm to get the ankle length hem I was after. I cut off 6cm and left myself 2cm for a double folded hem. I hemmed them on the machine, but I’m temped to unpick it and sew it invisibly by hand as a machine hem doesn’t fit with the style of the trousers. But they’re wearable for now.

And now onto the jacket.

I was going to use the Great British Sewing Bee Hacking Jacket as a pattern to base the jacket on, but I could not get the pattern pieces to fit. Boo. I do want to make it one day as I like the style of it, but for this jacket I decided to slightly wing it and take it in on all the seams where I had unpicked – I maybe shouldn’t have been so hasty to unpick so much!

I think it might be easier to just list all the places I took it in and by how much (in case you’re interested):

5cm off the shoulders
3cm off the side seams (initially I took off 5cm but the pockets were too much to the side so I changed it)
3cm off the back seam (in 2 chunks as I kept tweaking the adjustments)
3cm off the shoulders of the jacket (to bring the shoulder seams up from part way down my arm)
3cm off width of the sleeves
8cm off the top of the sleeves (I traced the shape of the sleeve head and moved it down the sleeve by 8cm to try to keep the button detail on the cuffs of the sleeves, but this didn’t end up working
6cm off the back of the collar

Phew! As you can imagine, this took a loooot of time and a lot of trial and error. The only new things I put in were new shoulder pads, made from wadding. The ones that I took out of the jacket were really past their best and starting to disintegrate. Also they were much too big for my re-sized suit, so it seemed easier to start again.

I made all the same adjustments, above, to the lining. I thought about fiddling with the lining first, so I only had to sew the shell once, once I knew what adjustments to make, but I figured the wool could withstand more unpicking than the lining, which isn’t the most expensive lining in the world.

I made sure to keep the front of the jacket as untouched as possible so I would be able to put the lapels and collar back, without having to know how they work! I sewed a new seam in the back of the collar piece to narrow it so it fitted between the 2 lapels. It was also an advantage to have kept the lapels as they are still pretty well presses, so they don’t want to flap so they’re flat. The notch of the collar/lapel is maybe a little high, but there wasn’t much I could do about it to be honest!

It took a lot of fiddling to get the sleeves right – that is definitely a tailoring skill that I don’t have. I kept the original sleeve head shape and size as I feared making it so small the jacket would have to shrink to fit it, and not the other way around. At one point one of the sleeves was pretty twisted, because there are 2 seams on the sleeve (only one of which I unpicked and took in) and I had lined up the wrong one with the seam on the jacket. It did not feel right! As I mentioned above, I was hoping to keep the button detail on the cuff, but I couldn’t figure out how to do it – and, to be honest, I was running out of time for the deadline! It would have taken a lot more brain than I had at the time to figure out how to re-attach the lining to the button thing, so I got rid of the whole thing and just did a normal hem/lining seam.

The back is maybe the least successful part – but maybe it just needs a good press? I tried to shape the back so it wasn’t quite so straight, but each time I basted it, it looked wrong, so I reverted to a straighter shape – and I’m glad I did as it’s more in keeping with the original style of the jacket. I also managed to keep the 2 vents at the back, which was, again, a headache to work out how to put the lining back in. I wish I had taken photos as I was unpicking as then I would have know how various bits looked before and would have had an idea of how to put it all back.

I’m glad I managed to keep all the pockets – on the outside and in the lining – as they keep the jacket looking quite like the original, and I didn’t have to sew any pockets! Hurray!

The final change I made was to shorten the jacket by 6cm, leaving a 3cm hem (which is how much hem was on the shell before), then the lining was shorter and neatened the whole thing. I was slightly shocked when the lining actually fit the shell, when I went to sew them together again. I bagged it out, unpicking a seam in the side of the lining, then stitching it back by hand once the jacket was turned around. I used this tutorial from Grainline for attaching the lining at the cuffs.

I have resewn the buttons since I took these photos, by the way – you can see below that they absolutely do not line up! It was very late and I was rushing to finish and take photos before the deadline of midnight on the 31st October!

I even managed to reuse the same hook for the back of the jacket. And this is the original hanger the suit was on – I assume my Dad stole it at some point! 🙂

These are all the scraps I have left over after all of the changes I made. It doesn’t look like too much, but I will try to use these up at some point to make the refashion a little lest wasteful. No idea what I’ll use them for, though!

I definitely want to have a go at a proper tailored jacket, from start to finish. Maybe I’ll see if there is an online course or something, so I’ll learn some tricks of the trade. I’m pretty please with how this turned out and I’ve already worn the trousers to work a couple of times. I think the jacket will be a nice warm layer now the weather is getting colder! I have some nice thick jumpers but most of my cardigans are pretty thin, so I think this jacket will see quite a lot of wears when it’s too cold for a cardigan, or over a jumper when it’s really cold.

October Makes and November Plans

October was a fairly productive month for me, mostly because I had last week off work and used most of my time off as a sew-cation, with a couple of days doing fun stuff for The Boyfriend’s and my birthdays (which are 8 days apart).

My first finished make was my coral  Sew Over It Anderson Blouse.  I think the fabric might have been a little on the thick side for the pattern, but I do like it and I love the colour – I need more coral clothes in my life.

I also managed to finish 2 of the dresses I had planned to make – my yellow geometric patterned Marianne Dress and my black and white striped In The Folds Jersey Dress. They took one afternoon each – I love sewing with jersey!

My biggest project of the month, however, was my suit refashion for The Refashioners challenge. I juuust got it finished in time for the deadline, though I doubt turning a suit into a suit will be imaginative enough to win the amazing prize package! If you follow me on Instagram you will have already seen some photos of my refashion, and there will be a full post coming on Friday explaining all the changes I made so sorry if you get bored of seeing it over and over again! I’m pretty please with how it/they turned out, if I say so myself.

So now onto my plans for November. Are you getting as sick of me saying I’m going to make jeans as I am? It’s been a whole year! Maybe November will finally be the month!?

The Sew Over It Nancy Dress I planned last month is already partly made, so this is a little cheaty, but I hope to get it finished this month.

I’ve also cut out a couple more shirts as I find myself wanting to wear shirt more and more, so hopefully I’ll get my white Archer and my spotty Melilot finished too.

I think this should be enough to keep me going!

Save

 

 

August (& September) Makes and October Plans

I’m back from my blogging break. Thank you to everyone who left me a message on my last post. It’s lovely to know there are people out there who are so nice and caring. Sorry I didn’t reply – I didn’t really know what to say.

I ended up not making much in September – I was working on an embroidery thing for my Aunt, who I made the meme cushion for and I wasn’t at home for quite a few days so I didn’t sew any clothes, but I did have some sewing fun at the Great British Sewing Bee Live and seeing the Balenciaga exhibition at the V & A museum – there will be full posts on each of these things (including my stash from the GBSB live!) coming up soon.

So my makes are from August. You’ve already seen the items that took up most of August – my outfit for the New Craft House Summer Party, including shoes! By the way, they’re throwing a Winter Party on December 9th. You should all definitely book tickets – I’ve already booked mine, to defend my ‘best outfit’ title! 😉

The only other thing I made was another Collins Top – I love my first one so much I made another over the bank holiday weekend……and then the weather went really cold so I haven’t worn it yet, boo!

And now onto my plans for October (and probably November too, to be honest!).

I really definitely want to make my 2 pairs of jeans, which I already have fabric for, made by the end of November. I want to make one pair in October, but I haven’t decided which pair yet.

I’ve had this coral Anderson Blouse cut out for a couple of months, and now it’s getting colder, I do need some more nice long sleeved tops for work, so this is first on my list to make – hopefully I’ll make it this weekend.

I bought this amazing mustard graphic jersey from Fabrics Galore a couple of months ago (they’re sadly out of stock, but they do have it in a grey colourway) and I’ve decided it might be perfect for an Ebony Dress – I’m not sure I’ve got enough, so if not it will probably be a Marianne Dress, with the long sleeves.

If you can’t tell, I’m craving snuggly jersey dresses now it’s getting colder. I got this stripey jersey, which is pretty thick, from What Katie Sews’s destash sale and I’m hoping there is enough to make an In The Folds Jersey Dress as I like my electric blue one so much. I might shorten it a bit, though, as it is pretty long!

The third dress on my list is the Sew Over It Nancy Dress out of this amazing crowd print viscose which I bought at the same time as the mustard jersey above. Fabrics Galore still have this one in stock!

My final plan for the next month or 2 is to at least cut out the Carolyn Pyjamas in this amazing boaty Liberty print fabric my friend gave me a few months ago. Now it’s getting cold, I find I want some lovely snuggly pyjamas – a lot of my ready to wear clothes, including pyjamas, are getting a bit worn out now but I’m reluctant to buy replacements, so I’m going to try to replace the things I still wear that I’ve bought with versions I’ve made.

The one thing I really absolutely must make is my suit refashion for the refashioners. This is my suit. It actually belonged to my dad – I asked my mum if I could have it a couple of months ago, and now it definitely feels more poignant to be refashioning one of my dad’s suits. I think I’ll ‘just’ make it into a suit that fits me as I don’t have one, and I figure I can wear the trousers and the jacket separately at work if I don’t want to be as smart as wearing a full suit!

What are your sewing plans for Autumn and are you joining in with the refashioners this year?

Save

Save

 

 

 

Save

Save

Save