Tag Archives: Wedding Outfit

Business in the Front, Party in the Back (literally)

So a while ago I saw a photo of a Thai actor in the below outfit and immediately thought about recreating it. Last year I had 2 weddings to attend and for one I was going to wear my Mersis Dress which I made the previous Summer. But for the other one, I figured why not make a new outfit!?

You can see that the above outfit is more of a jumpsuit than separates – the front is one piece, but with suit vibes at the top. I decided I wanted to make separates – much more practical for ahem going to the bathroom (you don’t end up basically naked!).

I wanted the trousers to be what I consider stereotypical suit trousers, so with some pleats, welt pockets on the back and with front pockets. I came across Butterick B6878 and while the illustrations and photos on the pattern don’t make it look amazing, I did some googling and decided to go for it.

There are 2 darts on the back and 2 pleats on the front. I made the size 10 and actually can’t remember if I made any changes and didn’t write any notes – normally I write fitting notes as I go so if I make the pattern again, I’ll know what I did last time. There are shorts, tapered leg trousers and wide legged trousers. I went for the wide legged version.

I ended up making 4 welt pockets in total as the jacket also had 2 – though double welts rather than single welts. For those keeping count, I had a total of 6 pockets in my outfit! Winning!

Obviously sometimes you need sustenance while you’re sewing. IMHO you can’t beat a good cup of tea!

The jacket pattern I used was the Ready to Sew Joe Blazer. I used this pattern before for my pink smoking type jacket and since I’d already hacked it to kind of be double breasted, I thought it would be a good place to start. Oh, a word on the fabric. It was this lovely blush pink linen/cotton blend I bought from a fabric shop in Abingdon called Mason’s. They have 3 craft shops in total and are kind of legendary locally. I wasn’t sure what to expect but I was pleasantly surprised by their range of fabric and they have every notion you could think of.

Before when I hacked the pattern I pivoted the fronts to make them wider but this made them on an angle, so this time I toiled it a couple of times to figure out how best to do it and went with slashing and spreading (again can’t remember by how much sadly). You can see above I pinned a little wedge out of the front to make it even more straight, then sewed the facing to the front along that line from the inside.

Of course there was also a lot of hacking to the back. I merged the back side and centre back pieces into one and then cut a semi-circle out of the back, leaving a bit extra for seam allowance. It was definitely a head-scratcher to figure out the construction to make it all look neat, but I figured it out in the end.

↑ business in the front

↓ party in the back!

The loop at the top which holds the ‘strings’ was 20cm x 11cm and sewn in half with a 1.5cm seam allowance. The loops were 74cm, 128cm and 146cm long, though I did have to slightly adjust some of them so they weren’t too slack or too tight.

I did really love wearing this outfit to my friends’ wedding back in August but there was quite the heat wave that week so maybe it wasn’t the most sensible choice! I was more than a little warm. I did take a t-shirt to change into in case I couldn’t cope with wearing the jacket and once I started dancing to the live band, I did admit defeat sadly.

Not to blow my own trumpet but I am really quite pleased with how the back in particular turned out, but also managing to make it actually look like a double breasted suit on the front – though the bottom set of buttons looks a little low proportionally, looking at these photos. Eh, the sewist’s curse, to always look for flaws that literally no-one else would ever notice!

While I may not get the chance to wear the whole outfit very often, I am definitely planning to wear the trousers with some other tops. And actually as part of Wear It On Wednesday I have already worn them once – I think when the weather gets a bit warmer they’ll get more into regular rotation!

To preserve my modesty I did add a popper to the front to make sure the lapels didn’t gape and show everything! As I’m sure you can appreciate I couldn’t wear anything underneath the jacket!

I did ask one of my friends to take a few photos of my outfit on the day. You can almost feel how hot it was in the photos – so sunny! I love hot weather but this outfit was not the best choice and I didn’t take any alternatives. Clever me!

I really enjoyed trying to recreate an outfit from photos I found online. I’ve done it a couple of times before (both outfits I wore to the dressmaker’s ball were red carpet copies [1 and 2]) but I definitely want to do some more of it. I just need some occasions to wear some more formal outfits…

A Zero Waste Dress for a Wedding

2 Replies

A couple of weeks ago I made this (mostly) zero waste pattern for my sister to wear to a wedding that she’s going to next year. I used the Daisy DIY Maya Dress tutorial and it was so easy to follow. The only wasted bits of fabric were the scoops you take out of the front and back necklines.

You use your own measurement to decide how but each piece needs to be. Luckily the fabric Phoebe had bought was the exact right width to get her bodice fronts and backs from one full width. The rest of the pieces used a full width too – it was a narrow width cotton. The sleeves and the ruffle at the bottom ended up being the same height, not necessarily by design but it was a happy accident. And the ruffle at the bottom was 3 widths of the fabric in total and ended up using the full length we had left. There were 3m in total of the fabric.

I honestly can’t remember the last time I did so much gathering – or any gathering for that matter! But since there are no closures, it’s a pretty quick sew – the slowest thing was hemming all the ruffles!

We did decide to use some scraps of plain navy fabric to add some pockets – because who doesn’t like pockets?! And since I took these photos I also added some waist ties, from the same navy fabric, because whereas I like the loose billowy look, Phoebe wanted to be able to shape it a little at the waist. I used the Hinterland Dress pattern pieces as a guide, and we used it for the neck shaping too as Phoebe has like 8 Hinterlands and likes the neckline, and how you can tie it for a looser or tighter fit as needed.

She was originally going to make the Zadie Jumpsuit for her wedding outfit, but then we saw about buffet dresses being a thing on the sewing bee and it seemed like it would be easier to fit, cool to wear if the weather is hot – and you avoid the whole ‘naked on the toilet’ problem you have with jumpsuits!

I really enjoyed sewing this dress, after I got over the stress of cutting into the fabric and praying our measurements were okay! It was nice to sew something for someone else and to do something relatively simple. I definitely have my eye on another of Daisy DIY’s tutorials for some fabric I’ve had for a while in my stash – I’m probably going to do the Gathered Rectangle Dress. I’ve measured my fabric and I just about have enough – and with the hot weather we’ve been having, I think it might need to be my next project! I don’t have any summer dresses really!

My niece wanted to be in the photos too! It looks like the greatest photobomb!

Mersis Dress for a wedding?

1 Reply

Just before I moved, I decided to make a Mersis Dress I had been planning to wear to a wedding that was to take place this Summer (having been postponed from last year), but it has been postponed by another year – but at least I’m ready early and won’t be sewing the hem on the train on my way there!

This is the Mersis Dress by Pattern Fantastique – I totally lusted after their sequinned version and immediately knew it could be a good option for this crepe I had been hoarding for my wedding outfit. There were going to be two weddings last year but one did take place with only 20 people and the other has been postponed – you wait ages for a good wedding, 2 come along at once, swiftly followed by a global pandemic!

I was originally going to make the Zadie Jumpsuit, which looks amazing on everyone I’ve ever seen it on! But then I thought about the whole ‘having to get naked to go to the toilet’ thing and decided maybe a dress would be more practical for tipsy toilet trips!

I especially love the shape of the back neckline and I’m so pleased I decided to make this pattern. It feels really loose and relaxed on, but still looks chic I think, and has interest in the ginormous sleeves!

I made the size 10 with no changes – it’s such a loose fit all over that it’s not too difficult to fit but I wanted the shoulders and neckline to fit nicely and I think I made the right choice of size. The pattern goes up to a size 26, which is 51″ bust, 44″ waist and 54″ hip. It’s not the most inclusive set of sizes but they used to only go up to a size 16 so they have improved what they offer, so I felt okay about buying the pattern.

The crepe was something I bought from an instagram destash and there was 3m, which was lucky because being so long, this does take up quite a lot of fabric. I am 5’3″ and didn’t make any changes to the length, though I like that it sits a little longer on me than in the pattern images – I assume it’s drafted for the standard 5’6″, though I can’t find that info on the website. I definitely should have ironed the dress before I took these photos, though!

I don’t know if I’ve mentioned before, but I can be a bit slapdash with cutting out – I like to batch but out a few projects at a time and tend to do them a but quickly, especially if the fabric is a bit shifty, which this was. I definitely could have taken more care with the cutting out as some of my pieces ended up not quite fitting perfectly. The pockets also gape a little bit as I matched the notches instead of following my instinct to get them to lie flat, though I don’t think it looks terrible – it follows the line of the curved side seam.

I think I would be interested to make this pattern again, in a more stable fabric as a slightly glam summer dress. It could lend itself to some colour-blocking too, as there are some interesting seam lines. I also kind of want a sequinned version still…

Of course I might still change my mind about wearing this to the wedding by the time it comes around, but then I think I won’t possibly ever wear this, so I should stick to my guns. But sewing a new thing is always fun – and having an event as an excuse is my favourite thing…..

Lace Wedding Outfit

23 Replies

I’ve finally sewn up some of the lace I wrote about in my post about lace. Hurrah! (I was meant to take pictures at the wedding, but totally forgot, sorry! I blame the prosecco….)

I made this dress for a wedding I went to last weekend – which was awesome, by the way. I haven’t been to loads of weddings – I’m not someone who has multiple ones every Summer for 5 years in a row (maybe I don’t have many friends!?) – so it was fun to have one to dress up for. There wasn’t an official dress code – which is awesome – but I still wanted the excuse to dress up and make myself something fancy.

You may remember in my lace post I mentioned making a dress for the wedding and I found some photos as inspiration. There was one that stayed with me and became my main inspiration for this dress. I liked the simple top, pleated skirt and sort-of-matching-but-not-really underlining and lace.

I was planning to also copy the high-low hem, but after a google of what they look like on actual people and after scratching my head about how to do it with the scallop edge of the lace being all around the bottom, I decided to forgo it.

I decided to underline the dress instead of lining it so all the seams would be hidden on the inside and I wouldn’t have to fiddle around with teeny french seams or double stitching or anything like that – I would like to have a go at this, though, and since I have plenty of lace left I can easily make something else that’s lined instead of underlined. I used the left-over fabric from my BHL Georgia dress (this is a bit of a BHL outfit btw) as the underlining. There was exactly enough left – and I had to cut the back bodice sideways to the grain. The 2 skirt pieces are on the selvedge (which cunningly meant I didn’t have to hem them!) and the front bodice is on a scrap folded in towards the middle – I had to cut out the skirt pieces before I could cut it out!

I agonised for ages about what colour to put underneath my lace. You may remember it looked dull when put over bright colours. I had pretty much decided on cream but then changed my mind and went with navy and I’m soooo glad I did! I cut out the pieces in lace and the cotton sateen (as I think my Georgia was made from) and zig-zagged them together with bright orange thread – so it would be easy to unpick. This was the theory anyway – a lot of the time it got caught in my seams and was a pain to get out, especially in the pleats on the skirt! Definitely use either a tiny or massive seam allowance if you do this!

The bodice is the Emery bodice as I’ve already made it twice (1, 2) and done all the fitting work before and I’m inherently lazy when it comes to fitting! I sewed the side seams with a 1cm instead of 1.5cm seam allowance as I’d done last time when the bodice ended up a bit tight!

I didn’t really think about the pattern placement when I was cutting out the lace – apart from the scallops on the bottom. I probably should have centred the lace pattern on the bodice, I wouldn’t do well on the Great British Sewing Bee! I did manage to remember to sew in one of my labels, though.

As well as the bodice, I used the pockets from the Emery. I LOVE pockets!!! It was really useful on the day of the wedding too, as they were big enough to hold my phone so I was always ready to take photos.

The skirt of this dress was the real challenge. I used the BHL Elisalex skirt as a basis – in terms of length and width at the top of the skirt. I probably could have started from scratch given how much I changed, but it felt too scary! Since the Elisalex already has pleats in, I thought it would be a good starting point. It has box pleats, though, and I wanted knife pleats (I think they’re called knife pleats!). Each box pleat was 8cm on each side, so I could change it easily to be 2 knife pleats also of 8cm each. I initially wanted 3 pleats, though, but couldn’t fit them in nicely – the 3rd one ended up on my hip, which wasn’t the most flattering. I had already added another 8cm into the width of the skirt pieces, though, so I made 2 12cm pleats instead. I’m talking about in each ‘quarter’ so 2 pleats on each side of the front and 2 on each side of the back. I’m pretty pleased with how they turned out! They maybe could have been a little closer to the centre, but they seemed pretty close as it was on the pattern.

The other bit of measuring was to make sure the width of the top of the skirt minus the pleats matched the bottom of the bodice pieces – I included the seam allowances in my measurements as it was the same on the bodice and skirt. The Emery and Elisalex were pretty close and I only had to alter it by a cm or two. It was particularly important for me to make sure these matched as I was adding the inseam pockets from the Emery, so I couldn’t alter the side seams of the skirt – and I couldn’t alter them on the bodice either, or I wouldn’t have got it on/ it wouldn’t have held together.

You may also have noticed the fact that the skirt is not tulip shaped as in the Elisalex, but more a-line. I made the bottom hem of the skirt 10cm wider than the top of the skirt (which was 24cm wider than the original pattern) and drew a straight line for the side seams, for the back and front pieces. Once I’d taken out the pleats, the difference between the top and bottom became more pronounced. I’m really pleased with how it turned out – I didn’t want it to look like a circle skirt but I wanted it to balance out my shoulders.

Although I said I didn’t think about the pattern placement – particularly obviously on the bodice! – the one place I did think about it was on the skirt side seams. I made sure the scallops looked uninterrupted so the seam wouldn’t be quite so obvious on the hem. Also, as you can see, the underlining skirt was 1.5 cm shorter than the lace over skirt, so the scallop looked its best. One of the things I loved about making this dress was than I didn’t have to do any hems! Does anyone else hate doing hems?

I took a further 2.5cm off the length, on top of the 2ocm I’d removed previously! I wanted it to sit just on my knees – and because of the scallops I knew it would be a massive pain to take it up, so I measured my ideal length and hoped for the best! It could maybe have been a cm or two shorter, but I think it looks fine.

When I had the idea for this dress I didn’t really think about the weather. Here in the UK we’ve had a rather cold May and it was really really cold the weeks before the wedding, so I decided to make myself a jacket. Since I already had the BHL Victoria and had made it twice (1, 2), I thought it would be a good option and – hopefully – look nice with the dress. I decided to make the cropped version as I measured the hem would hit the waist of the dress.

Mustard yellow and navy is one of my fav colour combos, so I ordered 2m of mustard yellow ponte roma from ebay and hoped there would be enough fabric to self-line it. Spoiler alert! There was.

I had originally wanted to make the jacket in coral – and have matching coral shoes – but I really struggled to find any coral fabric. If you know of anywhere that sells coral, do let me know! The other problem is no-one really agrees on what colour coral is! Sometimes it’s pretty much pink and sometimes it’s orange. I couldn’t find any coral shoes either, so I decided to go for mustard. Couldn’t find any mustard shoes either, though – hence the boring navy, though I’ll probably get more wear from navy court shoes. One other thing I learned – love wearing yellow/ mustard. It looks disgusting as nail varnish!

The Victoria Blazer really is quick to sew up! It’s not too tailored, which I like – it gives it a more relaxed feeling. I think if I was in a really tailored blazer with this dress I would have felt my outfit was less young, if that makes sense? I love a tailored jacket, but with like skinny jeans. I thought about leaving off the cuffs and collar, but decided against it as I was worried it would look really weird! It was fun to sew this up in a knit – albeit a knit without a huge amount of stretch. I made sure the stretch went across the body and not up and down – I didn’t want it sagging! Because this is a pattern for wovens, though, I used a straight stitch and sewed it up as though it was a woven. Luckily I have a little left of the fabric, so I’m thinking a Colette Astoria, which I just bought in their sale this weekend!

All in all I think this was a successful wedding outfit! And I mastered sewing with lace for the first time! Hurrah! Also, I’ll definitely get lots more wears out of the jacket, so it’s not an entirely ‘special occasion’ outfit.